Hello. Thanks for mapping.
Please check this document how to map high buildings
https://docs.google.com/document/d/1z7uDwYm4oNmlexHIhJxGCjPpNhCQAgRia5aEJr_4MwM/edit?usp=sharing
Best regards

Hello, Thanks for mapping.
About mapping high buildings

https://docs.google.com/document/d/1z7uDwYm4oNmlexHIhJxGCjPpNhCQAgRia5aEJr_4MwM/edit?usp=sharing

Best regards

Hello.
Thanks for mapping here.
About mapping of high buildings

https://docs.google.com/document/d/1z7uDwYm4oNmlexHIhJxGCjPpNhCQAgRia5aEJr_4MwM/edit?usp=sharing

best regards

About mapping high buildings.
https://docs.google.com/document/d/1z7uDwYm4oNmlexHIhJxGCjPpNhCQAgRia5aEJr_4MwM/edit?usp=sharing

Hello. Please do not duplicate already mapped buildings. (I will remove them)
And,,,map more accurate.
best regards

Hi, from the imagery we cannot see if buildings have shared sidewalls. So, when it is not clear that buildings are terraced (1 roof over the whole length)
we ought to map buildings as a single building, freestanding.
Most buildings are rather square. A building with correct squared buildings is difficult to map, so each rectangular building need to be squared with the Q key while selected. (we are still waiting till it is possible to map a building with squared corners in 1 go in IdEditor, like in JOSM , another much used editor,)
You will find these agreements in the mapping guidelines. (best practice)
Here you find a video how to map buildings.
https://www.youtube.com/watch?v=U4Mfpnvp6Y8&list=PLb9506_-6FMHULD9iDUAh-4qpxKdVspnD&index=14

Best regards

Thanks for mapping. Rather accurate.
Please don't connect nodes of buildings to other objects like area borders.
Best regards and keep mapping

Hello. Thanks for mapping. Rather accurate. However, High buildings (you see a large shadow) shows also the sidewalls. Just map over the rooflines and move the whole to its footprint. (where the sidewall meets the ground)
Best regards

Hello. Thanks for mapping.
Please don't connect nodes of buildings to each other.
Use the Ctr key when you map buildings close to each other.
And, square each building when it is still selected with the Q key.
Try to map more accurate over the rooflines and don't include the shadows.
Best regards and keep mapping

Hello. Thanks for mapping.
Please do not tag traces just leading to farmland as unclassified. Track is the correct choice.
and... solve the issues shown by the issue triangle before you upload your work
Best regards

Hello. Thanks for mapping .
A remark. Never tag a trace. wider than 2-3 mtr as a path.
Best regards

Hello. Thanks for mapping.
Use the correct tagging please.
See the instructions and this wiki
osm.wiki/Highway_Tag_Myanmar
Never connect a highway direct to a waterway when it not crossing it.
Don't map traces in farmland which just give access to farmland.
Don't add a 'one way' tag to a highway. We cannot see the sign on the imagery.
I changed highways into farmland mostly into tracks.
Best regards
Best regards

Hello. Thanks for mapping.
Please do not tag roads in farmland as residential. Check the wiki how to tag highways. Here no need to map traces just in farmland. Check the instructions, please.
Best regards

Perhaps this is a better picture
https://drive.google.com/file/d/1ycku5dzFE_EluXkToPe9e_-kPkrWHlON/view?usp=drive_link

Hi. Some issues here
https://drive.google.com/drive/folders/1X5E-Fedeon1BmmJ_XiRLVQ4Z3yPXaHLw?usp=sharing
And, you did not adjust any existing buildings which were incorrect mapped.
Improve your mapping skills please.

Hello. You ought to map from the custom imagery. Check the instructions. Task invalidated.
Please don't map trucks or lorries as a building.
Best regards

Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
A: Inaccurate mapping.
C: Collecting adjacent buildings and mapped it as 1 building.
E: Buildings not squared.
F: Buildings partly hidden under trees.
G: Included the shadow of the building.
H: Included a yard of clearing.
High building(s) incorrect mapped. See par 20 chapter About Buildings

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/164535499

Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
A: Inaccurate mapping.
C: Collecting adjacent buildings and mapped it as 1 building.
E: Buildings not squared.
F: Buildings partly hidden under trees.
G: Included the shadow of the building.
H: Included a yard of clearing.
High building(s) incorrect mapped. See par 20 chapter About Buildings

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/164535499

Sorry. Forget my previous message.
I used the Esri imagery to review your work.
Best regards

Hello, Thanks for mapping.
Please pay more attention to accurate mapping. A number of buildings are not mapped as they should be.
Best regards