Please be more accurate when drawing alongside rooflines. You regularly just draw a rectangular, ignoring corners of complex buildings.
Quality prevails above quantity
---

Published using OSMCha: https://osmcha.org/changesets/157454489

Hello.
You mapped 2 warehouses as 1 building.
You can clearly see that it are 2 buildings. Map them as 2 buildings
Best regards
---

Published using OSMCha: https://osmcha.org/changesets/157454827

Hello. Please square each rectangular building after drawing it by pressing the Q key while the building is still selected ! Make it a habit.
Best regards
---

Published using OSMCha: https://osmcha.org/changesets/157456553

See my comments on another changeset.
Please improve your mapping skills
Best regards
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/157487315

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
A: Inaccurate mapping.
E: Buildings not squared.
High building(s) incorrect mapped. See par 20 chapter About Buildings ( you can see the sidewalls here as well, so adjust the mappings)

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/157485357

Hello. Thanks for mapping.
Please map buildings not as multipolygons. Just as single building.
Multipolygons are used to map courtyards within (large) buildings.
Best regards

Hello. Thanks for mapping.
a few remarks.
Buildings should be mapped as building=yes. nothing else.

A remark about the way high rise or multi-story buildings are often mapped
On the imagery, you see both the roof and a sidewall (with multiple floors)
The imagery is taken under a certain degree and shows you the height of a building.
Don't map both the roof and the sidewalls as 1 building.
Draw just the rooflines as a building and move it to the building's footprint.
See this clip.
https://drive.google.com/file/d/1V5-bADsYiffCD9bo6l64YOdTvmKqMGry/view?usp=sharing

Best regards and keep mappings

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
C: Collecting adjacent buildings and mapped is as 1 building.
High building(s) incorrect mapped. See par 20 chapter About Buildings

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/157429144

Hello. Thanks for mapping.
A remark about the way high rise or multi-story buildings are often mapped
On the imagery, you see both the roof and a sidewall (with multiple floors)
The imagery is taken under a certain degree and shows you the height of a building.
Don't map both the roof and the sidewalls as 1 building.
Draw just the rooflines as a building and move it to the building's footprint.
See this clip.
https://drive.google.com/file/d/1V5-bADsYiffCD9bo6l64YOdTvmKqMGry/view?usp=sharing

Best regards and keep mapping

Hello. Thanks for mapping.
A remark about the way high rise or multi-story buildings are often mapped
On the imagery, you see both the roof and a sidewall (with multiple floors)
The imagery is taken under a certain degree and shows you the height of a building.
Don't map both the roof and the sidewalls as 1 building.
Draw just the rooflines as a building and move it to the building's footprint.
See this clip.
https://drive.google.com/file/d/1V5-bADsYiffCD9bo6l64YOdTvmKqMGry/view?usp=sharing

Best regards and keep mapping

Hello. Thanks for mapping.
A remark about the way high rise or multistory buildings are often mapped
On the imagery, you see both the roof and a sidewall (sometimes 2)
The imagery is taken under a certain degree, what shows you the height of a building.
Don't map both the roof and the sidewalls as 1 building.
Draw just the rooflines as a building and move it to the building's footprint.
See this clip.
https://drive.google.com/file/d/1V5-bADsYiffCD9bo6l64YOdTvmKqMGry/view?usp=sharing

Best regards and keep mapping

Hello. Thanks for mapping.
A remark about the way high rise or multi-story buildings are often mapped
On the imagery, you see both the roof and a sidewall (with multiple floors)
The imagery is taken under a certain degree and shows you the height of a building.
Don't map both the roof and the sidewalls as 1 building.
Draw just the rooflines as a building and move it to the building's footprint.
See this clip.
https://drive.google.com/file/d/1V5-bADsYiffCD9bo6l64YOdTvmKqMGry/view?usp=sharing

Best regards and keep mapping

Hello. Thanks for mapping.
A remark about the way high rise or multi-story buildings are often mapped
On the imagery, you see both the roof and a sidewall (with multiple floors)
The imagery is taken under a certain degree and shows you the height of a building.
Don't map both the roof and the sidewalls as 1 building.
Draw just the rooflines as a building and move it to the building's footprint.
See this clip.
https://drive.google.com/file/d/1V5-bADsYiffCD9bo6l64YOdTvmKqMGry/view?usp=sharing

Best regards and keep mapping

Hello. Thanks for mapping.
A remark about the way high rise or multi-story buildings are often mapped
On the imagery, you see both the roof and a sidewall (with multiple floors)
The imagery is taken under a certain degree and shows you the height of a building.
Don't map both the roof and the sidewalls as 1 building.
Draw just the rooflines as a building and move it to the building's footprint.
See this clip.
https://drive.google.com/file/d/1V5-bADsYiffCD9bo6l64YOdTvmKqMGry/view?usp=sharing

Best regards and keep mapping

Hello. Please check this out.
Mapping of high buildings
https://drive.google.com/file/d/1V5-bADsYiffCD9bo6l64YOdTvmKqMGry/view?usp=sharing

Hello. Thanks for mapping.
The instructions are to map buildings and roads. Please focus to that.
You mapped land use objects and introduced many errors by doing that. Please just map buildings and highways.
Don't connect nodes of objects to other objects. These are errors which have to be solved,
Best regards and keep mapping

Hi again.
Due to the fact that most buildings are poor mapped, most of your mappings will be removed and need to be mapped according to the mapping guidelines.
Sorry that we have to do this.
Best regards and improve your mapping skills please.

Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
Issues found on your mappings

A: Inaccurate mapping.
C: Collecting adjacent buildings and mapped is as 1 building.

D: Connecting Nodes to other features.

E: Buildings not squared.
High building(s) incorrect mapped. See par 20 chapter About Buildings

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/157256792

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
Issues found on your mappings

A: Inaccurate mapping.
B: Overlapping buildings.

C: Collecting adjacent buildings and mapped is as 1 building.
D: Connecting Nodes to other features.
E: Buildings not squared.
G: Included the shadow of the building.
High building(s) incorrect mapped. See par 20 chapter About Buildings

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S

Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
E: Buildings not always squared.
High building(s) incorrect mapped. See par 20 chapter About Buildings

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/157251235