I wondered around for a few hours yesterday, and got complete mapping of NCN 4 from Castle Park to the Downs (so everything the map lacked near the centre really). I also completed NCN 41 up to Queen's square, where the signs just seem to indicate that if you want route 4, you just keep going around until you meet it. Likewise for the connection from 4 to 41. Interestingly, the signs suggest you oppose the one-way system (for route 41 to route 4), but you can only cycle on the pavement for half of the connection.

As a side note (and obviously I wouldn't use it for mapping), the meeting of 3, 4 and 41 in the centre of Queen's square shown on the sustrans map seems false, and that you can't even cycle on any of the gravel paths leading to the centre.

The NCN 3 seems to finish at Temple Meads, even though there is (a little) signage on Redcliffe Way. I would have to totally make up a suitable route to lead it there (incidentally Redcliffe Way leads to Queens Square). However, someone wanting to get from 4 to 3 could probably work it out themselves, so adding a non-existent connection to the map seems silly.

Additionally, there is (very scarce) signage on Clarence Road and Wapping Road indicating a connection from route 3 to route 41 (but not, strangely, for route 3 coming from 41). The route is actually a rather nice connection, but Bedminster Bridge roundabout would be a pain (i.e. unmanageable) to cycle around, and the pavement doesn't have cycling provisions, so I am unsure if I should map that as (3)/(41) or not.

Die meisten Strassen sind zumindest grob erfasst, jetzt kommen vor allem feinarbeiten. Es gibt auch schon einige Wald und Feldwege zusehen.

Bin der Meinung, dass vor dem Hochladen geklärt werden soll, ob der Track nicht schon in der Datenbank ist... Das scheint einigen Datenlieferanten egal zu sein. Finde ich sehr Schade!

Divided ways to show bridges and set layer values.

Hello to all,

I tried to work with JOSM. But without success :(
As far as I understand it, I have to download am map (e.g. by marking) and then edit the data.
When I select an area (by lat and lon or marking in the interactive map) I just receive a 403 fault.
What did I make wrong ?

First try in lower part of Spicheren, France. Adding to residential roads.

Looks like the german-french border is not quite correct there... but on location you won't see any sign of a border anyway ;-)

Strassen sind soweit erfasst, allerdings fehlen noch viele Namen. Mein erster Versuch mit dem Diktiergerät hat dazu beigetragen ;-)
Bleibe wohl besser beim Schreiben.

Haltingen sollte zu geschätzte 75 % erfasst sein.

Added the Windmill pub on Clapham Common

My first update to openstreetmap. Saw that lots of my local roads were labelled incorrectly or not at all. Also joined up some roads.

Added some additional point of interest such as postboxes and pubs. Not quite sure what to put Balham Leisuire Centre down as on Elmfield Road, so just labelled it as a public_building.

in Dublin. There are more unnamed roads nearby

one interesting feature that's difficult to map - there are several roads which are unexpectedly difficult to cross given their size (no traffic islands, no pedestrian lights anywhere, and views obstructed by the curve of a bridge)

Deze week zijn mijn eerste bijdragen zichtbaar geworden, enkele wegen die verkeerd getagd waren gecorrigeerd in Hoorn.
Nu ben ik bezig met de museumspoorlijn Hoorn-Medemblik, omzetten van rail naar preserved.

I gave awesm's edits a look over and added some details missed from our Bushwalk on Monday.

Tried to upload tracks for Setia Alam Eco Park, but getting "connection was reset error" from the server. Will try again later.

I split I-15, I-215, and the motorway links at bridges and added bridge tags. I also added layer information for this interchange. This "leaked" north to Twain but the bridges, layers, etc. aren't complete there.

TIGER data doesn't match reality here. The alignment of Blue Diamond Rd was changed so that traffic can flow smoothly onto Windmill Ln. The realignment also forced a change to the motorway links.

A piece of Blue Diamond Rd was renamed W Moberley Ave.

OSM was edited to match these changes. I also renamed part of Blue Diamond Rd to "old Blue Diamond Rd". This easement may not exist any more but the asphalt is still there so I didn't want to delete the road from OSM.

Have been working on updating the Downtown Area and the Port of Tampa.

Highlights include:

-Updated 22nd Street corridor, including new alignment.

-Corrected onramps and access to the Crosstown Expressway.

-Added a number of parks within the Downtown Area (ex: Gaslight Square Park)

-Added one-way detail to downtown city streets.

-Removed a number of streets that have been vacated by the City, mostly due to new development.

-Added additional detail to rail lines within the Port of Tampa.

-Added TECO Streetcar line to Downtown Tampa Area (not completed yet through Ybor City)

Will continue to be working in the Tampa Area as time allows. Will keep the Open Street Map community informed of progress.

Einen Urlaub im Nordschwarzwald nutzend habe ich per Fahrrad das Straßennetz von Waldachtal -Salzstetten, -Heiligenbronn und -Cresbach, sowie Haiterbach-West und -Industriegebiet und außerdem Horb -Altheim und -Grünmettstetten weitgehend vollständig aufgenommen. Einige wenige Sackgassen fehlen. Die Leute auf dem Dorf sind meist recht freundlich, aber dann wiederum misstrauisch, wenn man jeden Winkel abfährt. Dafür sind jetzt einige Feld-, Wald- und Radwege rund um Salzstetten mit drin.

With thanks to awesm: http://www.australianit.news.com.au/story/0,24897,24028848-15318,00.html

Maybe we should contact the minister in question (Paul Lucas) and ask him if he wants to help OSM get Brisbane up-to-date. I'm sure the state government has some data that would be useful.

I'm not exactly sure how to start going about doing that though? Any ideas?

The only contact I've found for Paul Lucas so far is (07) 3396 0066, but a letter outlining OSM, and how other governments have made use of it might be a better approach.

Hi,

uploaded a ferry-way an some points in ibiza and Formentera yesterday evening/night.

Was just the first try to get a bit used to josm.

But I have left a lot of points in Formentera to be drawn.

Don't know how to call all those "caminos", have to search around a bit before I start, I think.

Frank

Been mapping Dar es Salaam for the past few weeks.. Finally done like 1/10th of the City.