As I understand what you describe, you intend to put the same information on both but you actually can't do that (I mean physically, it's not a policy).

A substation is a facility and it doesn't have primary and secondary sides.
voltage=a;b;c applies on such perimeters if you wish to document different voltages.
You may find up to five or six different voltages in a given substation with different transformers.
Primary side of one transformer is the secondary of another and so on. Then what does "primary" mean at the substation level?

The intention is valuable and anyone will appreciate it. However primary, secondary... don't exist for a substation and then we shouldn't use those voltages with power=substation, should you?

Hello

This substation got voltage:primary in this changeset and it's not an appropriate usage according to key's definition
way/1002130808

voltage:primary=*

There is a transformer inside the substation which is appropriate to get a voltage:primary value

Why adding voltage:primary to the substation?

Hello

Je comprends merci

Toutefois, la voie rapide nord sera bien en chaussée séparées, 2x2 voies.
La géométrie de la voie change précisément, regardes le passage sous les ponts entre avant et après les travaux.

Bonjour Futur3r,

Pourquoi avoir supprimé les voies en construction sur la Voie de Metz au nord d'Annecy ?
C'est tout en chantier par la bas en ce moment.

Bonjour,

J'ai remarqué que vous avez utilisé la clé utility=* sur certains poteaux avec des valeurs multiples.
Pourtant il es recommandé de ne laisser que la valeur principale.
Par exemple sur les supports enedis (operator=Enedis), seule utility=power est valide.

Pourrez-vous faire ces quelques modifications svp ?

Pas de mal, c'est pas trop grave.

Il n'est pas possible de restaurer l'ancienne version directement, il faut simplement la retracer correctement, rien de plus

Bonne soirée !

Bonjour,

Vous avez édité une voirie de parking autour du site Mavic de Pringy.
Cette voirie semble croiser anormalement la voie express toute proche. Pouvez-vous le corriger svp ?

Bonne soirée

Bonjour Eric,

D'où viens ce préfixe JR4/ dans les références de l'armoire ? (je sais ce que c'est mais ce n'est habituellement pas lisible sur le terrain)

Bonne soirée

Bonsoir

J'ai remarqué les quelques étiquettes des communes alentours comportant d'ex noms.
Nous preferons utiliser la clé old_name pour indiquer ces anciens noms.
Pouvez-vous faire cet ajout en les retirant de name=* s'il vous plaît ?

Bonne soirée

Bonjour,

Pourquoi les canaux de Riouperoux ont-ils été changés en route ?
Il me semble qu'ils sont en cours de déconstruction n'est-ce pas ?

Bonjour

Les lignes électriques ajoutées ont été supprimées à Orly, est-ce possible de les supprimer s'il vous plait ?

Hi VictorIE

Many power=substation objects combined with voltage:primary, voltage:secondary... in your area caught my attention.

primary, secondary, tertiary and so on relate to power transformer interfaces. A transformer is a device inside a substation, which is a facility.

See wiki : voltage:primary=*

According to history, those substation were described with voltage-high/low a few years ago, and replacement guidelines lead to voltage:primary/secondary on those facilities.
This will encourage confusion between power=substation and power=transformer.

According to you, is it possible to only use voltage=* with power=substation please?
This is huge work, no rush, we could discuss it if necessary.

Best regards

Hello

Why did you change the Canal de Provence waterway from pressurised to canal please?
I may have missed relevant clues about that.

This looks like a pipe flow section, no air in the duct between inlet and Rians outlet. See wiki for differences between both canal and pressurised.
Can you restore it accordingly please?

Best regards

Hello

Why did you change the Canal de Provence waterway from pressurised to canal please?
I may have missed relevant clues about that.

This looks like a pipe flow section, no air in the duct between inlet and Rians outlet. See wiki for differences between both canal and pressurised.
Can you restore it accordingly please?

Best regards

Hello !

C'est étonnant ce 25kV en HTA publique. C'est vraiment cette tension dans le coin ?

It sounds to be a real problem, which won't be completely solved by observing the small changeset encouragement.

If you are monitoring these changes with OsmCha, let them know how this issue occurs and ask them to check with country limits instead of bbox which can overlap different countries even with small areas.

This is valid for many places in the world, because using bbox is not appropriate.

This is data quality management changeset, moving country specific tagging to reviewed one.
Although I agree and try to refrain myself to make large changesets when contributing, such a changeset worth to be known by people monitoring one specific area within covered country.
We'd better helping each other on such topics. Those nudges could at least ask for particular context to understand what it's all about.
It feels like gendy54 pay respect to the rule's goal here.

Oui, je vois le cas. Merci du retour.

Ce serait plutot man_made=water_well + pump=manual + pump_mechanism=piston + handle=lever

Ce qui permet de qualifier le puits, la pompe et son levier

Bonne journée

Bonjour,

J'aimerais comprendre à quoi correspondent les objets man_made=pump ajoutés pendant ces modifications s'il vous plait ?

Y a-t-il vraiment des pompes en pleine rue ?

Bonne journée

Hi Jens and thank you for this answer.
The public documentation is marvelous, we wish we have the same in France!

Yes they are, Trift and Arolla tunnels are flooded tunnels and actual canals (not pressurized, channelized water course)
There is no pipeline involved here, it's pure mountain digging.
You may have some pictures in this video, a car can run inside: https://www.youtube.com/watch?v=DKClqshgy0w&t=120s

In this part of the facility, every tunnel that aren't inverted siphons are tunnels, not pipeline (combining tunnel=* and man_made=pipeline means the pipeline is in the tunnel)

Best regards