Hello. Thanks for mapping.
A remark, You tend to oversize the buildings you map. Stay within the rooflines. These huts have an overhang.
Best regards

Hello. Thanks for mapping.
Please check the comments how to identify round buildings
https://drive.google.com/file/d/1E9lhIbxBtzYxibS9vY0p2F9XvlWgdCUs/view?usp=sharing

Best regards

Hello. Thanks for mapping on this task
Please check this clip how to map a round building.

https://learnosm.org/en/hot-tips/tracing-round-buildings/
Best regards

Hello. Thanks for mapping.
Please do not map rectangular buildings as a round building.
See the general comments to recognize which objects no buildings
Best regards

Hello. Thanks for mapping
A few remarks
Please do not oversize the mappings.
When you spot an object, where you can see both a shadow on the inside and on the outside, it is not a building. Most likely a cattle yard. no need to mat those
Best regards

Hello. Thanks for mapping.
Please do not map courtyards as buildings.
Check the surface and the shadow.
Buildings mostly show a longer shadow than a courtyard wall.
Best regards and keep mapping

Hello. Thanks for mapping.
Please do not cluster buildings. Map them as individual buildings each.
Don't connect them by the nodes, either.
Best regards

And, do not connect nodes of buildings to each other.
Each building should be mapped as an individual one.
best regards

Hello , Thanks for mapping.
Please solve the issues. shown by the issue triangle before you upload your work.
Please map more accurate. Your mappings are rather oversized and don't reflect the reality.
Best regards and keep mapping

Hello. Thanks for mapping.
Please do not connect buildings together with their nodes.
Map each building individually. Do not cluster buildings.
Best regards and keep mapping

Hello. Thanks for mapping.
A remark.
Please do not connect nodes of buildings to each other.
Map them as individual buildings.
And, don't forget to square each individual building. (First unglue conneted nodes please)
Best regards

Hello. I commented with a standard message how your mappings are.
Here, you can see the adjustments I made on a number of mapped buildings.
Mostly. Collected multiple buildings and wrongly mapped high buildings.

https://overpass-api.de/achavi/?changeset=167693797
It is not the easiest task.
Best regards and keep mapping

Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
Issues found on your mappings

A: Inaccurate mapping.

B: Overlapping buildings.
C: Collecting adjacent buildings and mapped it as 1 building.
E: Buildings not squared.
G: Included the shadow of the building.

H: Included a yard of clearing.
High building(s) incorrect mapped. See par 20 chapter About Buildings

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/167684146

Hello. Thanks for mapping.
Sorry to say, but your mappings are not representative of the situation.
Rather big offsets, Wrongly positioned
In JOSM it is not difficult to map accurate isn't it ?
Check this webpage where you can see your mappings and my modifications.
https://overpass-api.de/achavi/?changeset=167449750
Please improve your mapping skills.
Best regards

Hello. Thanks for mapping.
Please square each rectangular building . Use the building tool if you don't have it installed yet.

osm.wiki/JOSM/Plugins/BuildingsTools

Also avoid buildings crossing each other. Use the Inline validator tool to find these issues.
Best regards

Hello. Thanks for mapping.
A remark. You mostly connected nodes of buildings to each other. This not the way buildings are to be mapped.
Map each building as an individual building. Keep the Ctr key down when you map close to another building. They will not snap together then.
Best regards

Hello. Thanks for mapping here.
a remark.
Don't map objects without visible roof as a building. 1 object shows only walls with a shadow on the inside as well as on the outside.
Best regards

Hello. Thanks for mapping on this task.
Your mappings are fine.
But, please do not add a hashtag as a name to a building.
Just building=yes.
Best regards

Thank you for mapping. You have correctly identified the location of most objects and mapped.
1 building has been mapped with an irregular shape. This is a round building with a courtyard (walled) in front of it. Just map such buildings as a round building
Reviewed by a validator at random or as requested.
FYI. Please view this video about common new mappers mistakes.
https://www.youtube.com/watch?v=Xs5wX592E1o&t=2s
https://www.youtube.com/watch?v=ltn1VOiq5_0
In this document, you will find some hints and tricks which might help to expand your mapping skills.
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit
Best regards and keep mapping.
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/167128655

Thank you for mapping. You have correctly identified the location of most objects and mapped.

Reviewed by a validator at random or as requested.
FYI. Please view this video about common new mappers mistakes.
https://www.youtube.com/watch?v=Xs5wX592E1o&t=2s
https://www.youtube.com/watch?v=ltn1VOiq5_0
In this document, you will find some hints and tricks which might help to expand your mapping skills.
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit
Best regards and keep mapping.
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/167129274