Hello. Thanks for mapping here
An urgent recommendation:
Please map each building accurate and square it (rectangular) with the Q key in the editor. Keep the building selected during pressing the Q key
Most buildings are good rectangular and the mappings should reflect that.
A hand drawn building is mostly not correct rectangular. Therefore use the Q key after mark it a building and the object is still selected.
Be aware that this will not work when the deviation to a square corner is to big. Then you have to adjust the building manually . After that you can square it again.

Please take your time to map accurate. You will waste Validators time if they have to correct lots of inaccurate mappings.
Use a mouse to draw.

Never let a node of a building connect to other features, like highways, other buildings or residential areas.
To avoid that , In iDeditor keep the Alt key down while drawing the building. In JOSM keep the Ctrl key down

Map each building individually. do not cluster buildings and call it 1 building

Please pay also attention on the issue triangle on the right-hand menu
It alerts you on warnings and errors.

Please (try to)solve these before uploading your work.

Best regards and keep mapping !

Hello. Thanks for mapping here
An urgent recommendation:
Please map each building accurate and square it (rectangular) with the Q key in the editor. Keep the building selected during pressing the Q key
Most buildings are good rectangular and the mappings should reflect that.
A hand drawn building is mostly not correct rectangular. Therefore use the Q key after mark it a building and the object is still selected.
Be aware that this will not work when the deviation to a square corner is to big. Then you have to adjust the building manually . After that you can square it again.

Please take your time to map accurate. You will waste Validators time if they have to correct lots of inaccurate mappings.
Use a mouse to draw.

Never let a node of a building connect to other features, like highways, other buildings or residential areas.
To avoid that , In iDeditor keep the Alt key down while drawing the building. In JOSM keep the Ctrl key down

Map each building individually. do not cluster buildings and call it 1 building

Please pay also attention on the issue triangle on the right-hand menu
It alerts you on warnings and errors.

Please (try to)solve these before uploading your work.

Best regards and keep mapping !

Hello. Thanks for mapping here
An urgent recommendation:
Please map each building accurate and square it (rectangular) with the Q key in the editor. Keep the building selected during pressing the Q key
Most buildings are good rectangular and the mappings should reflect that.
A hand drawn building is mostly not correct rectangular. Therefore use the Q key after mark it a building and the object is still selected.
Be aware that this will not work when the deviation to a square corner is to big. Then you have to adjust the building manually . After that you can square it again.

Please take your time to map accurate. You will waste Validators time if they have to correct lots of inaccurate mappings.
Use a mouse to draw.

Never let a node of a building connect to other features, like highways, other buildings or residential areas.
To avoid that , In iDeditor keep the Alt key down while drawing the building. In JOSM keep the Ctrl key down

Map each building individually. do not cluster buildings and call it 1 building

Please pay also attention on the issue triangle on the right-hand menu
It alerts you on warnings and errors.

Please (try to)solve these before uploading your work.

Best regards and keep mapping !

Hello. Thanks for mapping here
An urgent recommendation:
Please map each building accurate and square it (rectangular) with the Q key in the editor. Keep the building selected during pressing the Q key
Most buildings are good rectangular and the mappings should reflect that.
A hand drawn building is mostly not correct rectangular. Therefore use the Q key after mark it a building and the object is still selected.
Be aware that this will not work when the deviation to a square corner is to big. Then you have to adjust the building manually . After that you can square it again.

Please take your time to map accurate. You will waste Validators time if they have to correct lots of inaccurate mappings.
Use a mouse to draw.

Never let a node of a building connect to other features, like highways, other buildings or residential areas.
To avoid that , In iDeditor keep the Alt key down while drawing the building. In JOSM keep the Ctrl key down

Map each building individually. do not cluster buildings and call it 1 building

Please pay also attention on the issue triangle on the right-hand menu
It alerts you on warnings and errors.

Please (try to)solve these before uploading your work.

Best regards and keep mapping !

Hello. Thanks for mapping. Welcome New Mapper.
A remark. Please square each rectangular building with the Q key while it is still selected.
Best regards and keep mapping

Hello. Thanks for mapping.
Please do not include the courtyards as a part of a building.
Best regards and keep mapping

See my comment on other changesets
---

Published using OSMCha: https://osmcha.org/changesets/163583554

See my comment about your mapping skills on another changeset.
Most worse mappings are removed.
Again, please improve your mapping skills.
Best regards
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/163583141

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
A: VERY Inaccurate mapping.
B: Overlapping buildings.
C: Collecting adjacent buildings and mapped is as 1 building.
D: Connecting Nodes to other features.
E: Buildings not squared.
G: Included the shadow of the building.
H: Included a yard of clearing.

This project is not suitable for new mappers. Way to difficult. Even experienced mappers will see this as a challenge.

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S

Hello. Thanks for mapping.
In general, well done.
1 point. You mapped an irregular shaped object as a building.
This is a walled courtyard (for keeping stock I presume)
I removed it.
Best regards and keep mapping

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------

A: Inaccurate mapping.

E: Buildings not squared.
H: Included a yard of clearing.
Empty plots mapped as a building
Resume : Very sloppy mapped.

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/164163369

Hello. Thanks for mapping.
Your mappings are reviewed by a Global Validator.
Here you tagged a highway too generic.
Here, highway = residential is a better choice.
Check the Highway wiki please
Best regards and keep mapping
---

Published using OSMCha: https://osmcha.org/changesets/164163173

Thank you for mapping. You have correctly identified the location of most objects and mapped.

Reminder: Please be sure to square all rectangular buildings with the Q key and round buildings with the O key.
Reviewed by a validator at random or as requested.
When you see an object without a roof, don't map it as a building. (You can see a shadow on both the inside and the outside of that object.)
FYI. Please view this video about common new mappers mistakes.
https://www.youtube.com/watch?v=Xs5wX592E1o&t=2s
https://www.youtube.com/watch?v=ltn1VOiq5_0
In this document, you will find some hints and tricks which might help to expand your mapping skills.
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit
Best regards and keep mapping.
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/164007460

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
wrong tagging highways
mapping unimportant local traces. Focus on through going traces. (over the edge of the task)

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/164144623

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
wrong tagging highways
mapping unimportant local traces. Focus on through going traces. (over the edge of the task)

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/164144623

Hello. Thanks for mapping.
Please solve the issues shown by the issue triangle. You connected paths to the residential area. Never connect roads to other objects than roads.
Please connect paths to nearby highways to create a network.
Best regards

Most river crossings in rural land (path and tracks) are fords.
Bridges will be seen on important highways.
Best regards

Hello. Thanks for mapping.
Didn't you read the instruction when and how to tag roads ?
Most traces you mapped are hardly 2 mtr wide. Path should be the correct tag.
Best regard

Hello. Thanks for mapping on this task.
First. Please solve the issues mentioned by the issue triangle before you upload your mappings.
Please do not tag a road narrower than 3 mtr as a track. See the instructions pleas.
Best regards

Hello again.
When you map waterways, take this in consideration.
When you can jump over it, tag it as a stream. otherwise , wider, as a river.
Best regards