thanks for fixing huntingdon, but it broke plainview. fixed it.
bayview and north bay still need work.

hi Abask, welcome to OSM!
Be careful, you deleted a section of McDermeott Ave, and broke the Riverhead boundary. Adding layer=-1 to sidewalks isn't usually the correct thing (other options are to move the outline of a building, or use covered=yes on a section of sidewalk).
I corrected these.
Take your time, and keep mapping!

Hi Dom, welcome to OSM! Good job adding houses to the map. If you press 'Q' key when the building is selected, it will square the corners on the building and make them look nicer. Keep mapping!

good catch, It's still under construction, please revert.
also it's not an orchard, more likely a farmer that grows xmas trees.

It's partly fixed.
967236752 is in the relation twice, and it is a subset of 967234649 which is also in the relation.

found using https://tools.geofabrik.de/osmi/
but also using josm's validator.

This whole area is under construction (someone removed the landuse construction).

The wood you changed to scrub is really a basin. The residential you updated isn't big enough... it is all residential.
Will try and survey in spring.

duplicate ways: 979538610 and 979538611

repeat same role: 967236752 and 979538611

Hi Pard, the giant relation on this has a broken ring. Maybe it's time to chop it up into separate smaller simple ways. What do you think?

Welcome to OSM FrozenMapCat! Good job adding the houses. Quick tip, if you press the "Q" key with a building selected, it will square the corners. Makes the buildings look much nicer. Keep mapping! and if you have any q's just ask. Or if you want there is a discord and slack where people are talking/asking q's about osm.

Pete, can you look at the Matamoras boundary? Southeast corner seems to be out of the relation.

Hi This, welcome to osm. The house looks good, but would look better with squared corners. Pressing Q key will sQuare the corners on the selected object. Keep mapping!

Removing wetland does not seem correct. Can you comment on source of information?

the playground relation is getting validation errors. outer way shares segment with other rings. read osm.wiki/Relation:multipolygon

this relation is getting a validation error. Inner and outer ways intersect. Read: osm.wiki/Relation:multipolygon

osm.wiki/Keep_the_history

The 2 outers were overlapping. Outers can't overlap or touch in more than one point.

YW. It's probably easier to fix with josm. Let me know if there are any others you see that need fixing.

Hi peace2, fyi,
this change broke the wood relation. there is a small gap missing where the wood meets the top of the reservoir. I didn't want to touch it if you are still working in the area.

Thanks for the quick attention and nice reply.

Hi Chronoshift. fixed? It still has a few errors. It doesn't need to be a relation, just keep it simple. Same with the swingset, it doesn't need to be a multipolygon. The park shouldn't be glued to the roads either. It makes it difficult to update unrelated things when they are all glued together. Think of it this way, if you change the park boundary... should it move the road...no.
There are also errors with the church mp across the street, and also the parking at the senior center.
There are similar issues with the park on Veteren's drive.