Thanks ando2631
I’ll add the gate and tag it private again it the morning.

Hi
welcome to the OSM
Pleas note that we cannot use Google maps or street view as a source to edit the map as it is against their terms.
https://www.google.com/intl/en_au/help/terms_maps/
I will revert the changeset now.
If you are able to survey the street or otherwise verify using mapillary or other allowed source, please re-add the information.

Jeez! You’ve made Pitt St hard to drive along with the newly introduced sharp bends

Hi
in Santa Teresa you also deleted a number of buildings near Keringke Crescent and Church Street that were previously added by another mapper. All buildings are able to be mapped in OSM and they still appear to be in places using Esri World Imagery

Hi
building tags are only used on buildings and not the surrounding land. I altered the polygon shape to include the remaining building and tagged it as landuse=residential.
If the extra building is not used for residential use can you exclude it and give it tags to indicate it's use.

Hi Phil
I have bordered the housing area and tagged with name and as residential, put a gate at the entry and tagged the roads as private.
The wifi I tagged as as wifi cafe but if this is not that and just free wifi offered in a another business then it needs retagging as wifi=yes on the business (such as in a McDonalds for example)

no response, fixed as best I could remotely

Hi Grahame80
http://tools.geofabrik.de/osmi/?view=areas&lon=152.04926&lat=-27.25962&zoom=16
If you want to group all these things together in a relation the role should be outer.
Josm is best for doing relations.

I reverted this changeset due to displacement of traffic lights and a restaurant.
If you try again to add your business EnhanceTV, please also add a primary tag like office=company to define the object correctly and also try to so without damaging other parts of the map.

There is an address floor tag
addr:floor=*
but the level tag is more common

Hi
‘floors’ is not a recognised tag on OpenStreetMap.org
See building:levels=*
It is best to check on the wiki before guessing what tags exist

There is a plot tag place=plot but see the warning discouraging such tags.
If you wish to define the boundaries of each block of land a good way to do it is the map the fences from satellite images using barrier=fence as this is verifiable and not dependent on third party land boundary sets.

Hi
this looks to be a bit of a mess with the service ways running through the houses and this problem with a rough area marked http://tools.geofabrik.de/osmi/?view=areas&lon=153.40669&lat=-28.03692&zoom=18
In my opinion, it is preferable that the landuse=residential not be combined with the roadway tags but mapped separately though often preferred like that by others.
Do you want to try to fix it it or would you like me to revert your edit? I suggest you have a look around the map and see how other similar things are mapped and tagged.

I=

Hi
wondering why you have deleted many of the tracks that were marked private in the National Parkbut left other private tracks untouched. They are very evident and obviously still used by NP and probably also by emergency services staff.

More specifically, I refer to the northern boundary of Noosa NP west of Dolphin Point.

If you prefer the wood and national park boundary be kept seperate to enable you to align the wood boundary more accurately with trees, let me know and I will make them separate. The satellite imagery I used was too indistinct for me and my old eyes to detail the two separately.

now fixed. Northern wood multipolygon boundary coinsides with Noosa National Park boundary.

Hi Grahame80
I think the tanks also need to be tagged with
man_made=storage_tank and content=water .
The name is probably not needed then.
man_made=storage_tank

Another method is to add noname=yes
noname=*

Hi
We normally only give tracks and paths names if the are named. If unnamed it is best left without the name tag. You could add a note=your_text tag if you think other mappers need to know you have confirmed it is unnamed.