Outside of this bypass, I think most of the road should be highway=primary, since it carries quite a bit of traffic, but also has many properties along it. It has a similar feel to many US highways, which are usually tagged as primary roads.

That's a fair point. Perhaps the difference in quality between the bypass and the intersecting part could be made with the `expressway=yes` tag? That is, the bypass could be marked with that tag, which I believe is appropriate.

My main rationale was that the highway=primary went up to meet Tuckahoe Road, while the route under serves as somewhat of a bypass. There are no properties that can be accessed from this bypass, and it feels like a more significant, limited-access road. I thought those differences would be good to show, which is why I made the bypass highway=trunk. But again, if we think it's too insignificant of a segment, we can switch it back.

If you think that stretch is too short to warrant a change in classification, I would be fine with reverting it back to primary. I just felt that the higher classification is noticable as you drive down that road.

Of course there was a typo in my first changeset...

It seems as though you've marked both Ossining High School and its soccer field as "Ossining High School". I have not yet fixed this, so you can try to correct it if you wish.

There was already a point for Anthony's Nose. It has more detail, and is closer to the actual peak. I already fixed this, but going forward, please double check to see if something like this is already mapped.

These two points should not be placed. The unnamed "park" point is already mapped as an area. As for "Secret Beach", this is not the actual name of the place. The place does not seem to really exist. If you're referring to the beach that spans Croton Point, that should be mapped as an area if anything, not a point.

I already reverted these edits, but please be hesitant before adding points like this. As for the unnamed park point, check to see if something is already there.

If you ever have a question about whether something should be mapped (or how it should be mapped), feel free to send me a message.

Hi,

There are a few issues with this changeset.

First of all, you're not using the right tags for a driveway. in the iD editor, you would want to select the "Driveway" preset. In addition, since these are private driveways, you may also want to specify that. You can use the tag access=private, or by marking the respective field in iD.

I see that to signify that these were driveways, you named it "Driveway". This is not necessary (and should not be done!) if you simply use the correct tags/presets.

It also appears as though you are using Bing Imagery. In this area, Bing Imagery has very poor quality, and is essentially unusable. I have been using NYS Orthos Online, which provides a very high resolution image. In addition, the imagery was taken during the Winter, so you can see through trees.

I actually already submitted a changeset to correct these issues, so you can take a look to see what I mean. If you have any questions, I would be happy to help!