Danke, Frans. Thanks for the update💚

Cheers, Norbert

Thom B, I am not sure if these are valid buildings
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/150579696

Hi Ella, thank you. You identified a lot of buildings but did not square them accordingly. Please take note. With kind regards, Norbert
"After drawing the outline and tagging as a building, use the 'Q' key in the iD web editor to "square" the corners."
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/150991458

There ist so much to fix: buildings have tag "area" and are not even squared or round. Should I clean up?

"After drawing the outline and tagging as a building, use the 'Q' key in the iD web editor to "square" the corners."

Or use the 'O' key for round buildings.
---

Published using OSMCha: https://osmcha.org/changesets/149590221

added more, but did not square prior mappers work

@mrowls20
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/149578171

added more, but did not square prior mappers work

@nriceusa

Maybe you missed from the instructions:
After drawing the outline and tagging as a building, use the 'Q' key in the iD web editor to "square" the corners.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/149590738

added more, but did not square prior mappers work

@mrowls20

Maybe you missed from the instructions:
After drawing the outline and tagging as a building, use the 'Q' key in the iD web editor to "square" the corners.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/149578171

added more, but did not fix unsquared buildings mapped by @[abraun6] . Maybe you like to come back and look for yourself

"After drawing the outline and tagging as a building, use the 'Q' key in the iD web editor to "square" the corners."
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/149591541

added more, but did not fix unsquared buildings mapped by @[abraun6] . Maybe you like to come back and look for yourself

"After drawing the outline and tagging as a building, use the 'Q' key in the iD web editor to "square" the corners."
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/149592143

Concerning TASK 795 in
#15736: Missing Maps: Homa Bay county, Kenya (3)

Hi, @Asta_Asendia , I just checked in to this task and found your buildings are a bit strange.

Please use the Q key, to set right angles. Thank you.

"In iD: draw an area and label it as Building, then correct for right angles with the Q key. In JOSM: draw an area and use the tag building=yes, then correct for right angles using the Q key - OR use the building plugin. Most buildings are rectangular so make buildings rectangular even if a shadow, tree or roof pitch make it appear otherwise."

Hi, I squared and resized some 50 buildings. Please use in ID the key Q for buildings with right angles

@Geohprofe I squared some 88 buildings mapped by you.

"In iD: draw an area and label it as Building, then correct for right angles with the Q key. Most buildings are rectangular so make buildings rectangular even if a shadow, tree or roof pitch make it appear otherwise."

Please take note, and keep on mapping.

Hi Natália, I removed name=Edifício in your buildings
---

Published using OSMCha: https://osmcha.org/changesets/145152554

Norbert Dichter commented 2 hours ago

Hi @BodomAfterEight , thank you for your contribution. I see a lot of buildings have not right angles, they are not squared.

In iD: draw an area and label it as Building, then correct for right angles with the Q key. Most buildings are rectangular so make buildings rectangular even if a shadow, tree or roof pitch make it appear otherwise.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/146809305

Hi @Levis%20Ruto I see most of your buildings are not with right angles. Take care to not include the building shadow in the building outline. After drawing the outline and tagging as a building, use the 'q' key in the iD web editor to "square" the corners.

Hi @PH_876 I see most of your buildings are not with right angles. Take care to not include the building shadow in the building outline. After drawing the outline and tagging as a building, use the 'q' key in the iD web editor to "square" the corners.

Dear Hannah, (Hannah2912), I see most of your work as good as others, but I recently find you oversize your buildings. Just take the feature of the roof and not the surrounding shade. Take care, and keep mapping.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/145854257

o.k. Danke.

I am sorry for that, Taya.
Maybe a file from my machine got involved by switching between editors iD/JOSM.

Can you please delete these errors. Thank you,

Norbert Dichter

I am sorry for that, Taya.
Maybe a file from my machine got involved by switching between editors iD/JOSM.

Can you please delete these errors. Thank you,

Norbert Dichter