Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/177880220

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/177730091

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/176999602

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/177683047

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/177681279

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/177674732

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/177678565

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/177662752

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/177633346

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/177633580

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/177488830

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/177525628

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/175835843

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/177390000

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/177379401

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/177394465

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/177174536

Please map individual buildings without collecting multiple nearby buildings into a single object. Please accurately outline all buildings. Buildings should be mapped without snapping their corners to other buildings and features such as roads and paths. Buildings should have their corners squared. Check the task instructions for the full requirements.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/177170912

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/177170912

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/177144334