Hello, please be careful with what buildings you are merging node tags with because in some cases you are removing correct tags from the original buildings. In this changeset you transfer the hotel poi tags to a tower of this building and you removed the actual name of the tower which was "Tower 2", where as the hotel itself is actually the larger building here underneath and already has the correct hotel tags: way/31557331 . If you are unsure as to what to do with the node tags Id suggest to leave it as they were. I have already gone and corrected this building.

Hello, it looks like this changeset and some of your others in the area here have moved building footprints from their original position into incorrect and skewed positions (in this case the building was moved on top of the road). I have corrected these buildings in this changeset but please for future edits be careful with how you are altering building footprints...

I have fixed this case here: changeset/103436314 but many more exist...

Hello, it looks like when you are merging point tags to buildings you are not removing the point feature and are leaving behind empty points, please delete the points once you have transferred the tags otherwise you are leaving empty nodes with no information... I can see this has occurred in a large number of your changesets

Hi zyphlar! No worries, parking lot ways are sometimes ambiguous as to type so I figured in this case best to use parking_aisle given they are directly related to the parking spaces along side them. Agreed on the wiki notes, I just changed them to be a generic service road with no tag. Thanks for the note!

Hi Yunzhi, yes that looks good, sounds good. Thanks!

Hi VLD174! I saw you removed the water tag on this water tank/parking lot here. I am not sure what the best tag would be for this - its a open surface water tank that is filled only when needed for filming and then drained for parking the rest of the time - it does have the 'intermittent' tag on it which does go along with the water tag: intermittent=*?uselang=en so not sure what you think about it but perhaps place the water tag back here or use a different tag to denote what this is?

hello I am noticing that a number of these nodes that have been imported are empty nodes and are not building polygons, was there an error during import? I suggest taking a look at the resulting import to be sure...

For the most part Ill skip it but I havent been making airport poly additions systematically, only when I see certain size ones in areas I am working in that dont have a poly Ill add one.

The point could for sure be merged into the poly. I just didnt make that change to preserve the change history on the point and its not easy to do in Potlatch 2 but feel free to make the change if you like.

Hi iD-w,
I think you may have inadvertently removed the building tag from a building outline here: Way: Atelier 505 (842264986) I have already fixed it but just to be aware in case it happened elsewhere

Hello! No was not able to travel to the island on my last visit to the area but rather used aerial imagery to modify the roads on the island. From what I remember, all the roads on the island were badly mangled from a old Tiger import so I just aligned them to match up with what I could clearly see in imagery. Perhaps there are better imagery for the area now though.

Hi iD-W,
It looks like maybe one of your changesets inadvertently deleted part of columbus ave here (the bridge that crosses over I90), I cant seem to figure out which changeset it was but the road segment is now gone. Can you add the bridge segment back with the original tags?

Hi iD-W! I noticed a few of your landuse=residential tag updates on buildings look like they are unintentionally removing the existing building tags. I have already fixed the ones I can find that did this by adding back the building=apartment or yes tags but look out for that in the future in case it happens again.

Good question... was grappling with that myself... perhaps adding operator=* and/or owner=* tags for the two parties on the rec ground poly? Open to suggestions on it. Thought the relation on the poly was informative given the university considers is a part of the distributed campus even if its leased but also open to suggestions on that as well...

Hi MSoslow!
Quick question, are you sure this building has been demolished?:
way/707835677/history#map=17/39.89205/-75.16693 it shows up in the most recent Mapbox imagery... it just may not be in the Maxar imagery you are using, any thoughts?

thanks Carnildo, I just fixed it. You are right my brain misfired on that one.

Hi freebeer! Thanks for the tip! Good idea.

Burisma, feel free to make any adjustments to tags, like I said all that was changed was node/357926420 was deleted (because it was a duplicate) and node/357941533 that had similar information was kept (because it has a more recent date), so up to you which you wish to transfer to the polygon but again I am inclined to leave the existing node node/357941533 as is because it has elevation and was a gnis node bulk import...

Hi Burisma, that node was deleted because there was another duplicate node with similar information here: node/357941533 Figured it was best to remove the duplicate node that had older dates (357926420) and keep the node with a more recent date as is (357941533). Also the elevation tag is best as a node anyway rather than a polygon. In light of this I am inclined to leave the node and polygon tags as they are but please feel free to make changes.

Hi tylerchill, looks like the sidewalks (footways) you removed here now make the subway connections here un-routable for pedestrian routing to and from the subways. Do you think it would be best to keep any paths that actually connect point to point features for pedestrian routing purposes?